Maintenance of mechanical seals - KBK Engineering

Posts

Maintenance of mechanical seals

According to the drawing instructions for a fabricated part, a radiation transmission test was requested and carried out to investigate defects in the welding area. This test is necessary to ascertain the internal sWe can carry out all maintenance of mechanical seals and seal units in our dedicated factory, including procurement of repair parts, disassembly and assembly, and trial operation. If a mechanical seal is found to be faulty while servicing a single machine, parts can be quickly procured, repaired and installed in cooperation with TANKEN SEAL SEIKO. (Even machines with built-in mechanical seals, such as dispersing machines and pumps, can be serviced as a complete set, including the main unit.

General maintenance

Removed mechanical seal parts. Various inspections are carried out and repairs are considered
メカニカルシール整備全般
The rotary joint is also dismantled down to the inside, and one set is serviced, including the seal unit

Repair

Even the parts that make up the inside of the mechanical seal are repaired for durability through surface modification and surface treatment, and the sealing unit is maintained for long-term use.

セラミック溶射
Repairs to avoid age-related defects as much as possible, e.g. at the lip of the engine
シールユニット
Serviced mechanical seal units

Maintenance of whole machine

Even a single machine with an integrated sealing unit or mechanical seal can be serviced. Servicing the main unit and the unit at the respective factory allows for quick delivery and reliable servicing.

撹拌機整備前
Agitator before servicing
整備後の撹拌機
Both the mechanical seal section and the main unit are serviced and assembled
«
»